ARRIS TG3452A Wireless and other Settings - TekSavvy Community
<main> <article class="userContent"> <h2 data-id="modem-login">Modem Login </h2><p>On a Web browser please go to <a href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=http%3A%2F%2F192.168.0.1%2F" rel="nofollow noreferrer ugc">192.168.0.1</a></p><p>When prompted to login please use the default :</p><ul><li>Username: admin</li><li>Password: password (If this fails please use the defaults found on the back sticker of your modem)</li></ul><h2 data-id="wireless-set-up">Wireless Set up</h2><p>You can either Click Wizard for the easy set up</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2F6EXTUPLUK8U9%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/6EXTUPLUK8U9/image.png" alt="image.png" height="494" width="937" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p>Click Connection, In the new Sub menu click Wi-Fi for advanced</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FT7SU16Q2W4EA%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/T7SU16Q2W4EA/image.png" alt="image.png" height="474" width="942" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p>Click Edit on the band you wish to change.</p><h2 data-id="bridge-mode">Bridge Mode</h2><ol><li>Disconnect the coaxial cable from the Arris</li><li>Connect a device via an Etherent cable to the 1st LAN port</li><li>Remove all other Ethernet cables to all other LAN ports</li><li>Access the modem's interface, then log into the administrator account above.</li><li>In <strong>Gateway</strong> > <strong>Summary</strong> (which should be the default page after login in), locate <strong>Bridge Mode</strong> in this page, then select <strong>Enable</strong>.</li><li>After clicking <strong>Ok</strong> at the prompt, the modem will restart in Bridge mode.</li></ol><h2 data-id="wireless-channel-change">Wireless Channel change</h2><p>Click Connection on the side bar and Wi Fi</p><p>Scroll down and you will Advanced Settings where you set to Manual instead of Automatic.</p><p>Set the channel as desired and click Save Advanced Settings when completed.</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2F4054GH1TKRVQ%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/4054GH1TKRVQ/image.png" alt="image.png" height="447" width="709" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <h2 data-id="parental-controls">Parental Controls</h2><p>Click Parental Control on the side bar and you will have a variety of settings to change.</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FQKY9B1D4AQX5%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/QKY9B1D4AQX5/image.png" alt="image.png" height="529" width="939" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p>For instance, click Add to Block sites to block a Website or set up to block at a certain time.</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FDFFH6WQWEXSI%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/DFFH6WQWEXSI/image.png" alt="image.png" height="480" width="928" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p>Click Save when completed.</p><p>You can also block Keywords or devices.</p><p>You can click on Reports to see detailed reports.</p> </article> </main>