SmartRG 808 Bridge Mode - TekSavvy Community
<main> <article class="userContent"> <ol><li>Connect a device via an Etherent cable to the 1st LAN port</li><li>Remove all other Ethernet cables to all other LAN ports</li><li>Disconnect the coaxial cable from the SmartRG 808</li><li>Navigate to the modem's web interface. <a href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=http%3A%2F%2F192.168.0.1%2FSRGEng.asp" rel="nofollow noreferrer ugc"><strong>http://192.168.0.1/SRGEng.asp</strong></a> <em>(case sensitive)</em></li><li>When prompted login using the username of admin and the password on the bottom of the modem.</li><li>Click <strong>Connection</strong></li><li>Set the eRouter Provisioning Mode drop down to <strong>Bridge</strong>.</li><li>Click Apply.</li></ol><p>If the drop down menu is not visible, please go to <a href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=http%3A%2F%2F192.168.0.1%2FRgConnect1.asp" rel="nofollow noreferrer ugc">http://192.168.0.1/RgConnect1.asp</a> and then proceed from Step 4.</p><p>If all fails, click on Options instead and check Primary network bridged. Click Apply once selected.</p> </article> </main>
