You must have TekTalk Premium or Unlimited to access this portal.
Enter your TekTalk number, and your current Voice Mail PIN number as the password. Then click Login.
You can also do this from your TekTalk phone by dialing *72 + the 10-digit phone number you want to forward calls to (i.e. *725193331234). Wait until the phone number you dialed answers then call forwarding will be enabled. To disable call Dial *73.
On the main page you will see - When I receive a Call. You can select Forward to and enter the number! Click Apply when completed.
You can do this from your TekTalk phone as well. To enter this feature's menu, dial *60 or *80. The following codes are used in the Screen List Editing menu:
- 0 to hear the main instruction menu
- 3 to turn the call service on or off
- # to add a number to the list, then 01 to add the last calling number to the list
- 1 to review the list of numbers, then 07 to delete an individual number from the list
- * to delete an individual number from the list
- 08 to delete all the numbers on the list
- 09 to delete only the anonymous entries on the list
The TekTalk portal will give you more abilities than the menu.
Click Contacts on the Top and New Group
Name the group and click Save.
Click New Contact. You can block up to 5 numbers per contact. I call these in the example Unknown(s). You can name each what you would like, Enter each number into the fields listed and click Save when done.
Once the contact is added, please edit the contact.
Scroll to the bottom and check the box of the group you want to add them to. Click Save when completed.
Go back to the main page and click Rules, and click Add Rule.
Select the group in question and and hit Next.
Click the best option you want to have done. Click Finish and then Apply.
You can then add numbers to the contact group going forward.
Wild Card Blocking
These are handy to help stop Spam calls. To screen calls with wildcards we’ll need to set up Rules for it. Select Rules at the top:
If you have not been here before, click the link ‘start with an example set of rules’, otherwise skip this step
Clear out any sets of Rules you don’t want and any Rules within each set. Can clear all to start fresh if want. In the example below, we are ready to Add New Rule
In this example I want to block all calls matching the pattern 519-784-0???
After clicking Next you can select what to do with calls that match, in this case reject them:
Once finished adding or editting rules, Apply them
Back on the Summary tab, change the set of Rules to use and click Apply
This will now reject calls such as 519-784-0123 but allow 519-784-1234 (as well as allow other calls not matching 519-784-0???)
Voice Mail Increase Rings
Click on Message settings normally found near the bottom of the page. Then you can set the total rings and click Apply.
Voice Mail Greeting and E-mail
You can set up Voice Mail from your TekTalk phone by dialing *98. If away from home, Dial your home phone number, once you hear your greeting, press the star (*) key, Enter your voicemail pin.
To record a Voice Mail greeting message click Message Settings, Click Mailbox Access, Voice Mail Greeting, and select a different Use the Greeting. Click Personal and click Record button. Then click Apply when completed.
In Message settings you can click to Forward messages as E-mails and add an E-mail address. Click Apply when completed.
Voice Mail E-mail Notice
Click on Notifications and select E-mail.
Click on the Check box, Click on New Entry.
Enter the Address and then click Apply.
If you wish to remove it Click the X button.