Hitron models Bridge Mode - TekSavvy Community
<main> <article class="userContent"> <h2 data-id="hitron-cgn3cgn3u">Hitron CGN3/CGN3U </h2><ul><li>Disconnect the coaxial cable from the back of the Hitron CGN3</li><li>Connect a device via an Ethernet cable to the 1st LAN port</li><li>Remove all other Ethernet cables to all other LAN ports</li><li>In a web browser, type 192.168.0.1 in the address bar.</li><li>In the login page, provide the following credentials:</li></ul><p><strong>User name:</strong> cusadmin</p><p><strong>CGN3 Password:</strong> password</p><p><strong>CGN3U Password:</strong> It's the same password as the WiFi's network</p><ul><li>After login into the modem's interface, select the "Basic" option from the black bar on the top.</li><li>Select the "Gateway Function" tab.</li><li>Disable the "Residential Gateway Function", then select "Save Changes".</li><li>Click "Ok" on the message that will appears; The modem will now reboot in bridge mode.</li></ul><h2 data-id="cgnm-3550">CGNM-3550</h2><ol><li>Disconnect the coaxial cable from the Hitron CGNM-3550</li><li>Connect a device via an Etherent cable to the 1st LAN port</li><li>Remove all other Ethernet cables to all other LAN ports</li><li>Navigate to the Hitron CGNM-3550's user interface. <em>(192.168.0.1)</em></li><li>Enter the customer's administrative username and password in the <strong>Username</strong> and <strong>Password</strong> fields, then click <strong>Login</strong>.<ul><li>Use the default credentials of <strong>cusadmin</strong> for the username and <strong>password</strong> for the password.</li></ul></li><li>Click on the <strong>Basic</strong> tab.</li><li>Click on the <strong>Gateway Function</strong> tab.</li><li>Set the <strong>Residential Gateway Function</strong> to <strong>Disabled</strong>.</li><li>Click on <strong>Save Changes</strong></li></ol><h2 data-id="coda-4680">CODA-4680 </h2><ol><li>Disconnect the coaxial cable from the Hitron CODA 4680</li><li>Connect a device via an Etherent cable to the 1st LAN port</li><li>Remove all other Ethernet cables to all other LAN ports</li><li>Navigate to the Hitron CGN3's user interface. <em>(192.168.0.1)</em></li><li>Enter the customer's administrative username and password in the <strong>Username</strong> and <strong>Password</strong> fields, then click <strong>Login</strong>.<ul><li>Use the default credentials of <strong>cusadmin</strong> for the username and <strong>password</strong> for the password.</li></ul></li><li>Click on the <strong>Basic</strong> tab.</li><li>Disable the "Residential Gateway Function", then select "Save Changes".</li><li>Click "Ok" on the message that will appears; The modem will now reboot in bridge mode.</li><li>Select the "Gateway Function" tab.</li></ol><p><br></p> </article> </main>
