Grandstream Setup - TekSavvy Community
<main> <article class="userContent"> <h3 data-id="tektalk-physical-setup-(recommended)"><strong>TekTalk Physical Setup (Recommended)</strong></h3><h2 data-id="modem-to-ata-to-computer">Modem to ATA to Computer</h2><ol><li>Setup the modem so that it is connected to the internet.</li><li>Connect the ATA's WAN port to the LAN port on the back of the modem.</li><li>Connect a computer to the LAN port on the back of the ATA.</li><li>Connect a phone handset to the PHONE1 port on the back of the ATA.</li></ol><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FENCQ4S7NQSD7%2F375px-gsht502-physical-setup-mac.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/ENCQ4S7NQSD7/375px-gsht502-physical-setup-mac.png" alt="375px-GSHT502_Physical_Setup_MAC.png" height="168" width="375" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <h2 data-id="tektalk-modem-to-ata-to-router">TekTalk Modem to ATA to Router</h2><p>Modem to ATA to Router to Computer</p><ol><li>Setup the modem so that it is connected to the internet.</li><li>Connect the ATA's WAN port to the LAN port on the back of the modem.</li><li>Connect the router's WAN/Internet port to the LAN port on the back of the ATA.</li><li>Connect a computer to one of the LAN ports on the back of the router.</li><li>Connect a phone handset to the PHONE1 port on the back of the ATA.</li></ol><div class="embedExternal embedImage display-medium float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2F7I8LDTW0IH4I%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/7I8LDTW0IH4I/image.png" alt="image.png" height="168" width="375" loading="lazy" data-display-size="medium" data-float="none"></img></a> </div> </div> <h2 data-id="modemrouter-combo-to-ata-computer">Modem/Router Combo to ATA & Computer</h2><ol><li>Setup the modem/router so that it is connected to the internet.</li><li>Connect the ATA's WAN port to the LAN port on the back of the modem/router.</li><li>Connect a computer to the LAN port on the back of the ATA.</li><li>Connect a phone handset to the PHONE1 port on the back of the ATA.</li><li>If further troubleshooting is required, you may have to complete port forwarding onto the ATA.</li></ol><h2 data-id="modem-to-router-to-ata-computer-(not-recommended)">Modem to Router to ATA & Computer (Not Recommended)</h2><ol><li>Setup the modem so that it is connected to the internet.</li><li>Connect the router's WAN/Internet port to the LAN port on the back of the modem.</li><li>Connect the ATA's WAN port to one of the LAN ports on the back of the router.</li><li>Connect a computer to one of the OTHER LAN ports on the back of the router.</li><li>If further troubleshooting is required, you will need to connect a computer to the LAN port on the back of the ATA.</li><li>Connect a phone handset to the PHONE1 port on the back of the ATA.</li></ol><div class="embedExternal embedImage display-medium float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FVDLT9UHPCY06%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/VDLT9UHPCY06/image.png" alt="image.png" height="168" width="375" loading="lazy" data-display-size="medium" data-float="none"></img></a> </div> </div> <h2></h2><h2 data-id="required-connection-to-grandstream-ata">Required Connection to Grandstream ATA</h2><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FS4RKSVY4OPA2%2F350px-812-back.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/S4RKSVY4OPA2/350px-812-back.png" alt="350px-812_Back.png" height="78" width="350" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p><br></p> </article> </main>