CBN CH8568 Wireless and Bridge mode - TekSavvy Community
<main> <article class="userContent"> <p><strong>WHAT YOU NEED BEFORE YOU BEGIN:</strong></p><ul><li>Your CBN modem/router, plugged in and powered on</li><li>A computer, tablet, phone, or other device with internet browsing software installed – Firefox, Chrome, and Safari, are typical examples</li><li>A connection between your device and the modem- We recommend doing this by connecting an Ethernet cord from your device to one of the LAN ports on the back of the CBN, but you can also do this using WiFi.</li></ul><h2 data-id="wireless-set-up">Wireless Set up</h2><ul><li>Open a Web Browser and go to 192.168.0.1</li><li>Username: cusadmin</li><li>Password: CM MAC address (in upper-case).</li><li>Click on Wireless at the Top</li></ul><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FY301PKEO43PP%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/Y301PKEO43PP/image.png" alt="image.png" height="683" width="882" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <ul><li>Click on Security to change details like the SSID and Password</li></ul><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2FKHTV1JWPBBEL%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/KHTV1JWPBBEL/image.png" alt="image.png" height="626" width="886" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <h2 data-id="bridge-mode">Bridge mode</h2><ol><li>Remove all other Ethernet cables to all other LAN ports</li><li>Connect a device via an Etherent cable to the 1st LAN port</li><li>Click on the Internet tab</li><li>Select Bridge Mode and apply changes</li></ol><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://community.teksavvy.com/home/leaving?allowTrusted=1&target=https%3A%2F%2Fus.v-cdn.net%2F6032279%2Fuploads%2F939RIZ8EDUWD%2Fimage.png" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6032279/uploads/939RIZ8EDUWD/image.png" alt="image.png" height="703" width="902" loading="lazy" data-display-size="large" data-float="none"></img></a> </div> </div> <p><br></p> </article> </main>
