Log into the modem interface 192.168.1.1, enter this directly into your Web browser address bar.
- Username : admin
- Password : Found on sticker on the back of your modem. This is listed as the user/password on the sticker.
The wizard will automatically open with the following screens.
Set the preferred Wireless Network & Password. Band-steering is enabled by default.
Enter in the preferred login (this should be filled in) If it does not, please reach out to us to find your username and password.
Open browser and type in 192.168.100.1 into address bar.
Password is: Last 4 digits of the MAC/Last 4 digits of the serial number
This will bring up the main navigation page of the router.
To enter login/PPPoE info, click on Network tab on left hand side.
Then click on the Ethernet WAN tab in drop down menu.
Under IPv4 Configuration, use your Login. If you do not have this, please reach out to us so we can give you this information!
When username and password are updated with login info, click the orange Apply button
You will then see a notification showing the network settings are being applied.